An office access control system determines the conditions under which an employee, visitor or contractor can pass through a particular door, turnstile or other access point. For example, the system reads a card, checks permission to enter the selected area and grants or denies the request. Equipment, pass issuance and event logging vary with the system.
For an office buyer, the question is who can assign those permissions after the sale. A working seller's pass does not mean the buyer will get an administrator role, retain access to every level or be able to register a guest. Before buying, agree where the building system ends and the office system begins, what to test and what will be handed over.
The cover is a conceptual illustration of an access area. It does not depict the F-375 property or confirm its specification.
Think of three actions: present a credential, check permission and receive a decision. In one common setup, a person presents a card to a reader and the controller checks the information against the rules available to it. If access is allowed, the system sends a command to an operating device. This might be a lock or a controlled gate, depending on the access point.
A card or fob represents a credential; it is not a substitute for confirming someone's identity. A temporary code, mobile pass or registration with a security officer may also be possible. The same equipment does not necessarily support every option. If the building advertises several ways to enter, find out which are actually available to your company and who can use them.
A system may cover a single door or connect several points under central management. Before asking whether it is standalone or networked, clarify what it needs to do: revoke permission remotely, set different access hours or confirm that a change has reached the relevant access points. A controller or app does not establish that all these functions are available. For the wider automation context, see our overview of smart office technologies.
One route through a business centre can involve several separate permissions. Building rules govern the entrance, a lift may check permission for the selected floor, and the office may apply its own rules beyond its door. One card can sometimes be used for several steps, but it does not prove that one person manages the entire route.
Ask the seller and building management who is responsible for each point. Who approves access through the lobby? Who grants permission for the floor? Who can issue access to individual offices and technical rooms? If a pass works only with an escort, record who provides that escort and when. An assurance of “round-the-clock access” does not answer these questions.
Consider movement between levels. The buyer of a multi-level office may need to use all acquired premises and agreed technical areas, but ownership does not automatically give administrative access to the common building system. For each important point, confirm who grants permission and when it will take effect.
A working plan showing the relevant doors, floors and shared areas is enough to start the discussion. Compare it with building rules and the seller's list of assets included in the sale. Do not ask for technical settings for the common system. The buyer needs confirmation of the intended route and approval process, not authority over other occupiers' areas.
Draw up a short list of people, areas and access times. Include only actual tasks: where employees start their day, where visitors need to go, how equipment is delivered and who escorts a technician. The table suggests questions to ask. It is not a standard set of permissions or a description of a particular building.
| Role | Route | Permission and duration | What to confirm |
|---|---|---|---|
| Employee | Entrance, floor and workspace | Ongoing pass under workplace rules | Who changes or revokes permissions |
| Visitor | Reception and agreed meeting room | For the visit, with an escort if needed | Where the pass is issued and when it stops working |
| Contractor | Service entrance and work area | For the agreed period of work | Who approves the route and closes the request |
| Administrator | Agreed management scope | Named role limited to assigned duties | Who assigns the role and who provides cover |
Do not turn the matrix into a list of areas everyone must be able to enter. A visitor may need only a route to a meeting room, and a courier only access to an agreed delivery point. Plan how spaces relate to one another through office zoning. The access matrix adds times, permissions and responsibilities to the plan.
Imagine a company choosing an office where clients will visit regularly. At the viewing, the seller's representative uses their card to lead a group from the entrance to the meeting room. That walk is useful, but it does not show whether the buyer can arrange a visit, who will issue a visitor pass or how it will expire.
Ask authorised building and seller representatives to arrange a demonstration with a test pass. Agree who submits the request, which area is needed, how the access period is set and what counts as success. Do not use anyone else's active card or personal details belonging to visitors who are not participating.
If only part of the route works, do not write “access control works” without qualification. A better record might say: pass issued, entrance and floor confirmed, meeting room requires an escort, and issuance by the buyer has not yet been tested. This gives the parties something to resolve in negotiations, rather than a general impression from the viewing.
Separate equipment included in the sale from functions provided by building management or a contractor. A reader may physically stay on a door, but permission to change settings, a current subscription and servicing need not transfer with it. Check the arrangements with the parties that actually control those rights.
For each function being handed over, define what the buyer should be able to do. If the new owner is to issue passes, establish who creates their account, what it allows them to do and who helps if something goes wrong. A demonstration under the seller's account does not establish that the buyer will have the same permissions.
Record the transfer of administration without publishing passwords or secret codes. The general record of condition and included assets is explained in our guide to transferring non-residential premises. For access control, record separately what the seller confirmed, what building management did and what the buyer still needs to do.
If a separate role has been agreed for the new owner, test one permitted action under that role at handover. For example, an administrator issues a test pass limited to their area and then confirms its revocation. If only the contractor can change settings for now, record that limitation and agree when to test the new role rather than signing that full administration has been transferred.
Access must be withdrawn as well as granted. Before the sale, clarify how the company reports a lost card, changed responsibilities or completed works. If the building and office use separate systems, one request may not be enough. Check who confirms completion and how the company knows the permission was removed from the relevant system.
Existing permissions need separate attention at handover. Do not assume that the seller's staff, service personnel and temporary contractors will all lose access automatically when ownership changes. Establish who still needs access for agreed work, who is responsible for its duration and how the remaining permissions will be closed. Do not independently block active access rights.
Routine entry and safe escape serve different purposes. Under point 26 of the Russian Fire Regime Rules approved by Government Decree No. 1479 and in force when this guide was prepared, the locks on specified evacuation exit doors must allow them to be opened freely from inside without a key. Sites under a formally established special regime are subject to separate provisions. This is not guidance on choosing a lock for any given door.
If the route includes turnstiles or other devices, ask specialists to explain how people can leave in accordance with the design and applicable requirements. Do not infer safety from a button or an assurance that every door opens if power is lost. The scenario depends on the system and must be checked by authorised specialists, not a visitor at a viewing.
A separate operational question is what to do when a pass or service fails. Find out whom to contact, how authorisation is verified and when responsible staff are available. Do not switch off equipment or trigger an alarm for a demonstration. Ask for the documents relevant to the property and an agreed procedure for professional checks.
A log can show that a system received a request from a particular credential and how it responded. That entry does not necessarily establish that the cardholder passed through, and it does not show how long they worked. Clarify what the system records, who can view the events and whether the information is adequate for your purpose.
If requests and events contain personal data, establish who determines the purpose of processing, which information is needed and how access to it is limited. “It is only passes” does not answer questions about retention and transfer. Previous visitor logs and employee records should not be treated as routine accessories to equipment and handed over without separate assessment.
Face or fingerprint recognition is not a necessary part of access control. Using those characteristics to establish identity calls for separate review of the technology and applicable biometric data rules. Do not assume consent resolves every issue, and discuss an appropriate non-biometric means of entry in advance.
Suppose building staff issue passes for the first office, while the company could have its own administrator for internal doors in the second. For a team with few visitors, arranging entry through reception may work well. A company that frequently hosts external teams or schedules work outside usual hours will need to confirm that the relevant procedures are available at those times.
Compare both offices against the same tasks: arrange a visit, deliver equipment and revoke a lost card. For each, note how many parties are involved, who picks up a request if the responsible person is absent and which costs need separate agreement. An equipment purchase quote tells you little about ongoing support, and a short viewing does not confirm the terms of the service.
Finally, distinguish gaps that can be addressed through a confirmed procedure from those that need design review or separate approval. For example, a deputy can be assigned in a process, but the buyer cannot promise on behalf of building management that access rules on a shared floor can be changed. Before the sale, be clear which conditions remain unconfirmed and why that matters.
Summarise each relevant access point, required role, responsible party, confirmed scenario and outstanding question. Separate what the seller showed from what the buyer will be able to do after completion. For each unconfirmed function, agree the document, action or test that would resolve it.
If you are choosing a headquarters to own, see the F-375 office penthouse for sale. Check the equipment included and the property's actual access arrangements before the transaction. This guide helps prepare questions; it does not replace checks on the property, design and contract terms.
It is a system that checks permission to pass through a particular point, such as a door or turnstile. In a typical setup a reader receives the credential information and the controller checks it against rules before granting or denying the request.
Sometimes, but that depends on the arrangements. Different parties may control the building entrance, floor permissions and areas inside the office. Ask who manages each point and check the route you need.
Arrange a demonstration with authorised staff. Check who handles the request, issues the pass, enables entry to the agreed area and confirms that the permission has ended. Following the seller through on their card does not demonstrate this.
Not necessarily. The right to own equipment and the right to administer software or the building system must be checked separately. Agree account creation, the scope of permissions, support and how existing access will change.
Notify the responsible person under the building and office procedures. Find out who revokes permissions and who confirms removal at the relevant points. If several systems are involved, check each applicable process.
Not on its own. An event shows how the system responded to a credential, not who passed through, whether they worked or how long they worked. Time recording needs separate rules and sources of evidence.
No. It can use cards and other ways of checking permission. If biometrics are being considered, separately assess the technology, legal basis, handling of personal data and an alternative entry method.
No. Routine entry and evacuation are different modes. Authorised specialists assess whether exits meet the design and applicable requirements. A working card or the presence of a turnstile does not answer that question on its own.